 |
 | |
|
$75.00  |
dsPICprog 2
USB 2.0 In-System programmer for Microchip dsPIC
microcontrollers. dsPICprog2 is a programmer for the Microchip's
new dsPIC microcontroller family. Scalable
architecture allows you to be up to date with
new Microchip's products in the future.
|
|
 |
 |
||||||||||||||||||||||||||
 |
Installing USB drivers [180KB] |
 |
dsPICprog2 software
for Windows [535KB] Version 3.03.11.2005 with added support for: 30F5015, 5016 30F6011A, 6012A, 6013A, 6014A and some changes in program design |
|||||||||||||||||||||||
|
|
dsPICprog2 manual [407KB] |
|
Drivers for dsPICprog2 software [25KB] Version 1.0.0.6 |
|||||||||||||||||||||||
 |
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
dsPICprog2 Programmer: The
microcontroller is connected to the dsPICprog2 programmer via 5 lines, two
of which are +5V and GND. Unlike programmers whose operation is based on
bootloads (and which need to give away part of their memory to a
bootload program) dsPICprog2 programs the microcontroller externally so
that the entire memory is available for the programmer. dsPIC Microcontrollers can be programmed with 5V and 12.5 V. If programmed with 5V, RB3 pin can not be used for anything else except for programming, so that one pin of the microcontroller is not available for an application. dsPICprog2 programs with 12.5V generated through a supply pump from the supply voltage (+5V) thus leaving the RB3 pin free. Connection to the computer is made via the serial port, so dsPICprog2 programmer can work on all computers. |
||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
All trade and/or services marks are the property of the respective owners. |
|
© Copyright 2006 Circuit-ED. All rights reserved. 236 E 5th Street | Suite D4 | New York, NY 10003 | 212-473-3143 | 212-505-6206 (fax)
|
Buy an extra PIC microcontroller with some
programmer or development system. Click on image for more information.
