THIS ITEM IS IN STOCK & READY TO SHIP.
A One-Of-A-Kind Full-Featured LCD Made Exclusively For CircuitED!!! LCD Module is a 128x64 Pixel with a Samsung S6B0108 (KS0108) Controller and Factory-Mounted/Terminated TOUCHSCREEN and RGB LED BACKLIGHTING. ALL terminations for LCD control, RGB Backlight, and Touchscreen are available through a 25-SIL (Single Inline) Terminal with standard 0.1" Pitch. LCD Module is designed for ease of prototyping, engineering, and end-product installation. Read the following if mounting this LCD to a mikroE Development Board GLCD Connector mikroE development boards have a 20pin GLCD connector. This unit will fit directly to this connector via a 20-pin female straight connector soldered to the Q LCD, starting with pin 1. When mounted to a development board in this configuration, the LCD will operate normally using the standard libraries, with only the red LED backlight available. The user manually connects the touchscreen pins, #22 to #25 directly to available board microcontroller pins for touchscreen readings and control. MECHANICAL LAYOUT and PIN TERMINATIONS GLCD/CONTROLLER SPECIFICATIONS RGB BACKLIGHT SPECIFICATIONS DOCUMENTATION HELPFUL LINKS FOR IMPLEMENTING A 4-WIRE TOUCHSCREEN Resistive TouchPanel How Touchscreens Detect Where You Pressed Touchscreen Basics What Is A Touchscreen And How Does It Work Writing Drivers For Common Touchscreen Interface Hardware Touchscreen Source Code Library Using Swordfish Basic VIDEO DEMO NOTE: WE DO NOT PROVIDE TECHNICAL ASSISTANCE FOR THIS LCD PRODUCT. DATASHEETS ARE PROVIDED FOR GUIDANCE. YOU CAN PERMANENTLY DAMAGE THE LCD IF IT IS NOT CONNECTED AND OPERATED ACCORDING TO ITS SPECIFICATIONS. ALL UNITS ARE TESTED AND QUALITY CHECKED BEFORE SHIPPING Due To LCD Sesitivity to Static charges,rough handling, and miswiring.. WE DO NOT ACCEPT RETURNS OF THESE PRODUCTS!
Read the following if mounting this LCD to a mikroE Development Board GLCD Connector
mikroE development boards have a 20pin GLCD connector. This unit will fit directly to this connector via a 20-pin female straight connector soldered to the Q LCD, starting with pin 1. When mounted to a development board in this configuration, the LCD will operate normally using the standard libraries, with only the red LED backlight available. The user manually connects the touchscreen pins, #22 to #25 directly to available board microcontroller pins for touchscreen readings and control.
MECHANICAL LAYOUT and PIN TERMINATIONS GLCD/CONTROLLER SPECIFICATIONS RGB BACKLIGHT SPECIFICATIONS DOCUMENTATION
MECHANICAL LAYOUT and PIN TERMINATIONS
GLCD/CONTROLLER SPECIFICATIONS
RGB BACKLIGHT SPECIFICATIONS
DOCUMENTATION
HELPFUL LINKS FOR IMPLEMENTING A 4-WIRE TOUCHSCREEN Resistive TouchPanel How Touchscreens Detect Where You Pressed Touchscreen Basics What Is A Touchscreen And How Does It Work Writing Drivers For Common Touchscreen Interface Hardware Touchscreen Source Code Library Using Swordfish Basic
HELPFUL LINKS FOR IMPLEMENTING A 4-WIRE TOUCHSCREEN
Resistive TouchPanel
How Touchscreens Detect Where You Pressed
Touchscreen Basics
What Is A Touchscreen And How Does It Work
Writing Drivers For Common Touchscreen Interface Hardware
Touchscreen Source Code Library Using Swordfish Basic
VIDEO DEMO
NOTE: